Author: thecarpentershop

I already started building your kitchen cabinets you know….

Posted on by thecarpentershop

I already started building your kitchen cabinets you know….

How things are done series

The Carpenter Shop stocks common cabinet components for building cabinets in both raw MDF and melamine MDF.

We also have melamine MDF stock sizes of upper and lower cabinet that are ready for assembly, over 750 linear feet of cabinets with either stock slab doors and drawer fronts or we can make raised panel or five part doors in just a few days.

Who carries inventory in these Just in Time manufacturing days? The businesses that understand that customers have a choice and go elsewhere if you keep them waiting too long. For that reason, and to keep our costs as low as possible our overseas shop makes common kitchen and bathroom cabinet parts for us by the container load and once or twice a year we get in a container load to re stock our inventory.

Learn more Here at this link

Common Components Stocked

  • Parts like cabinet ends are nearly all the same
  • Working on parts when the shop is slow helps…
  • Construction time cut by about a week
  • Using cheaper labor allows lower  prices

 

We won’t keep you waiting for that new kitchen nor will we have your old kitchen torn up for months.

Call us at 405-942-2644 or email rough drawings of the walls showing locations of the things like doors and windows, pictures are nice as long as you tell us what you like about each picture.

 

Looking forward to finally finishing your kitchen.
Al Gerhart al@thecarpentershop.net

450-942-2644

 

“But I want all wood cabinets…”

Posted on by thecarpentershop

“But I want all wood cabinets…”

How things are done series

You get this on occasion, new customers asking for all wood cabinets. That is actually a legal trade term that the government cooked up and it includes particle board which is indeed wood and glue.  MDF is far better, stiffer, flatter, more consistent in thickness due to the compressed nature of the material. MDF is much heavier but that is only a problem for the cabinet maker.

The reality is few cabinets are made of all wood as you and I would classify it. Wood is unstable in large widths, it likes to cup and warp and twist. The design of a raised panel door isn’t because it is pretty, that outer perimeter of rails and stiles helps keep the center panel reasonably flat while the extra space between the panel edges and the inside of the groove (called cope and stick) allows the panel to shrink and well without creating gaps or breaking the glue joints in the stiles and rails.

Learn more Here at this link

Wood is unstable

  • It warps, twists, and cups easily
  • Wood shrinks and swells all the time
  • Build the components with the correct materials
  • Plan on expansion, build it into the design

 

Things like trim, toe kicks, rails and stiles, even drawer fronts up to around 12″ are fine in solid wood. Over that, expect some issues and be ready to live with them. And even in small sizes, the width will change along with the humidity in the room so there are tolerances for solid wood parts to allow for shrinkage and swelling.

Things like carcass panels, sides, tops,, bottoms or decks, and shelves need to be an engineered panel product. Parts that need to be solid wood are rails or stretches, parts that have screws and nails going into the ends where an engineered part would split, the wood will accept the nail or screw and hold long and strong.

In the end it is about using the best materials in the best spots. And NO particle board, ever, MDF, Classic Core blended MDF/Plywood panels, or plywood (where it can be used safely) make good carcasses.