| Galleries |
| The Carpenter Shop |
"Have nothing in your house that you do not know to be useful, or
believe to be beautiful. " William Morris
believe to be beautiful. " William Morris
Copyright The Carpenter Shop, 2007.
| 358 N. Rockwell Ave., Oklahoma City, OK 73127 |
| 405.942.2644 |
| Office Hours: M - F 7 a.m. to 3:30 Sat 10 - 1 Please call to make an appointment for any other time. |
 | |  | |  |
 |  |  |  |  |  |  |
| Door & Drawer Front Options |
Shown are our most popular door shapes.
| Raised Panel Profiles |
| Door & Drawer Front Edge Profiles |
| Cope & Stick Profile |
Cove Raise
Slant with Bead Raise
Slant Raise
Tulip Raise
This allows for expansion of the center panel
during humid periods which are common in
Oklahoma.
during humid periods which are common in
Oklahoma.
3/8 Roundover
Classical
Machine Edge
Thumbnail
This is the best one for
glaze.
This is the best one for
glaze.
3/8 Table Top
7/16 Table Top
Table top with bead
Drawer & door combinations from jobs that we've completed.
Drawer Front Options
Shapered Drawer Fronts
Slant Raise
Cove Raise
Tulip Raise
Slant with Bead Raise
Slab Drawer Fronts
Raised Panel Drawer Front
1 1/2" wide rails, 2 1/2" stiles
Drawer front must be a
minimum of 7 7/16" tall.
Drawer front must be a
minimum of 7 7/16" tall.
5-part Flat Panel Drawer Front
1 1/2" wide rails, 2 1/2" stiles
Drawer front must be a minimum of 6
3/16" tall. Cup pull may fit on panel.
Drawer front must be a minimum of 6
3/16" tall. Cup pull may fit on panel.
Edge detail to match door detail.
Slant with Bead Raised Panel
Slab Drawer Front
Thumbnail Edge Profile
Slab Drawer Front
Thumbnail Edge Profile
Slant with Bead Raised Panel
Shapered Drawer Front Same Raised Panel
Thumbnail Edge Profile
Shapered Drawer Front Same Raised Panel
Thumbnail Edge Profile
Slant Raised Panel
Larger DrawersLarger
Drawers
Larger DrawersLarger
Drawers
Slant with Bead Raised Panel 3/4" thick
Slab Drawer Fronts with Applied Moulding
Inset Doors & Drawer Fronts
Slab Drawer Fronts with Applied Moulding
Inset Doors & Drawer Fronts
5-part Flat Panel Doors
Slab Drawer Fronts on Smaller Drawers
5-part Flat Panel Drawer Fronts on
larger Drawers
Slab Drawer Fronts on Smaller Drawers
5-part Flat Panel Drawer Fronts on
larger Drawers
Click on images for larger views.
Mitered Doors & Why We Don't Make Them
Since we are a custom cabinet shop we are often asked to build
something that a customer has seen in a magazine. Mitered doors are
one of the items that customers frequently ask us to build. Women like
them because they have lots of detail. We don't build doors with
mitered construction & we don't recommend them to anyone. While
they are aesthetically pleasing and unique, they are not the best built
doors. Wood expands & contracts width wise based on the levels of
humidity. Like the mitered joints on the door casings in your house,
the miters will eventually open up & its to be expected & is accepted
within the industry. This from a major cabinet door company:
"Mitred doors will expand and contract in response to the environmental
conditions. Our doors are made with a gap tolerance of up to .010 on
the inside corner to allow for this expansion and contraction. Mitred
doors will not be warranted against joint separation that occurs due to
high or low humidity conditions.
A painted finish is not recommended on mitred doors."
something that a customer has seen in a magazine. Mitered doors are
one of the items that customers frequently ask us to build. Women like
them because they have lots of detail. We don't build doors with
mitered construction & we don't recommend them to anyone. While
they are aesthetically pleasing and unique, they are not the best built
doors. Wood expands & contracts width wise based on the levels of
humidity. Like the mitered joints on the door casings in your house,
the miters will eventually open up & its to be expected & is accepted
within the industry. This from a major cabinet door company:
"Mitred doors will expand and contract in response to the environmental
conditions. Our doors are made with a gap tolerance of up to .010 on
the inside corner to allow for this expansion and contraction. Mitred
doors will not be warranted against joint separation that occurs due to
high or low humidity conditions.
A painted finish is not recommended on mitred doors."
